Home >> Interior Design News

Art insider Angie Davey says forget the rules when hanging paintings. And, as the current creative director of leading online gallery Eyestorm, she should know. Here, Angie shares her tips on hanging paintings to bring out their full potential.

1. Pick your room

First things first, decide which room your art suits. Consider the room’s mood and painting’s subject matter, medium, colour and size. Find out how mydeco helps you match your art to your home and watch all our art videos for more tips and inspiration.

2. Wall sizes and shapes

Don’t fill every free wall with art. Decide where to hang art and where to keep it clear. Look at your furniture and the shape of the wall space around it. Prime locations for a larger piece of art might be above a low backed sofa or a dining table. Higher cabinets fill the wall space so there’s no need to place art near one.

3. Make your room seem bigger

Strong vertical lines in the artwork, frame or wall arrangement can add a sense of height in a room. Horizontal lines give the illusion of width so are best for narrow rooms.

4. Water allergy

High humidity or water leakage potential in a room? Do not, we plead, hang paintings here. Be wary of hanging art in the bathroom, small kitchens, basements, by un-insulated exterior walls, above radiators and in the immediate vicinity of humidifiers, vaporisers or air vents. Keep art at a constant room temperature (between 18 and 25°C).

5. Let’s focus

It’s imperative to consider the central hanging point in each room. This is normally at the average person’s eye level - about 160cm from the floor, unless you have very high ceilings in your home. Hang work so that the centre of each piece sits at this point, meaning all the pictures will look consistent with each other, no matter what their size.

6. Group little ‘uns together

Hang small works together, either in a regimented order such as in rows, or in a cluster. The central hanging point should lie in the centre of the group so they are seen as a whole and look consistent beside other works in a room.

7. Fixtures and fittings

Most professionally framed work will have either string or wire already attached to the frame’s backing. If stringing the frame yourself, ensure you tie the knots securely. Unframed canvases look best hung flush against the wall: secure two nails or screws (depending on the wall) at identical heights and half the width of the work apart into the wall. They should stick out of the wall about 3cm. Your painting will sit flush and secure against the wall.

8. Use picture hooks for framed work

Picture hooks are better than nails or screws for hanging framed work. They distribute the painting’s weight more evenly, pulling from inside the wall, rather than just downwards. The picture hanging kit £33.95 from Graham & Green has all the tools you could possibly need.

9. Light up

Reach your art’s full potential with picture lights. Invest in daylight bulbs, like galleries do. Ultraviolet light found in sunlight and artificial lights can damage sensitive artwork. Even if your frame includes special UV-filtering glass, it should never be hung in direct or bright indirect sunlight. Ordinary incandescent light bulbs are safer than fluorescent or halogen bulbs.

10. Clean your art

A soft cloth should be used to wipe over frames, and a soft brush for paintings. Cleaning products contain harsh chemicals and should not be used for art.

Annie Deakin is an expert furniture and interior design writer who is currently interested in roman blinds, coffee makers and dining chairs

Article Source: How to hang your art

It is important that commercial properties are presented well as they can reflect a business’ brand image, products and services. This is especially true of premises where customers visit every day.

There are many ways in which places such as shops, restaurants, hotels, bars and offices can be decorated to ensure that they are aesthetically pleasing, but flooring can really add the finishing touches to any room.

There are retailers specialising in wood flooring Bicester, Oxford, Cheltenham and Swindon areas who offer a wide range of products including hardwood flooring that can add a touch of luxury to any building.

Their flooring is offered in a variety of colours and wood types, you can be sure to find a product to suit your requirements, but you can be sure that whatever you choose will be of the highest quality, something which is important when placed in a space with a high volume of traffic.

As well as supplying a wide range of wood flooring they can also fit it into your commercial property quickly and efficiently, whilst treating your property with the utmost respect.

Throughout the process of selection and fitting, they work closely with their clients to ensure that a bespoke design, tailor made to the requirements of the property and business are met.

As well as commercial flooring, they also offer a selection of products suitable for domestic use, including natural wood floors, engineered wood flooring as well as complimentary doors and worktops.

If you are looking to purchase new flooring, either for your home or business contact a specialist who will be able to offer advice on a variety of products, alternatively visit their extensive showroom to see their range for yourself.

Written by Danielle Ingram on behalf of Clark Wood Floors Ltd, specialists in wood flooring Bicester.

Danielle Ingram, Content Writer for Creare Web Design and SEO specialists.

Article Source: Quality Commercial Wood Flooring For Bicester Businesses.

There are many new options in flooring today. In the past, your choices are limited, now you can even get rubber flooring. It is a long-term choice that May is right for your home.

What is of rubber flooring?

Rubber flooring can be manufactured from natural rubber or synthetic-based oil. Rubber flooring comes in a wide range of colors, shapes and sizes. For large rooms, in May you want to use sheet flooring; for smaller rooms to consider the interlocking tiles. You can start with bare soil or install over pre-existing floors.

An advantage of Rubber Flooring

The main advantage of rubber flooring is that it makes floor is soft and very resistant. It can help reduce the risk of injury to a standing position for long periods. It also reduces static electricity and bacteria, making it an excellent choice if you have small children. Because of its clear they will not be easily injured if they fall.

What Type of flooring do you get?

The basic choices for rubber flooring are large sheets of rubber rolled or less, interlocking tiles. Tiles can be used to create a one-of-a-kind which is the design and decoration of your home. Another thing to consider is whether or not you want to use an adhesive, it is necessary for the sheets of flooring.

How can you find Rubber Flooring?

If you plan to rubber flooring, May you have to do a little research. Start with stores flooring and ask them if they occur. If not, ask them if they know where you find it. Online is another place to look when searching.

How Much Is It?

The initial investment required to purchase and install rubber flooring in May seem a bit steep, between $ 3 and $ 10 per square foot. The cost over the lifetime of the flooring is more room for the original price paid. It is extremely durable and easy maintenance.

How can you install yourself?

If you are reasonably competent do-it-yourself projects, it should not be any problem to complete it. You’ll want to start with a perfectly smooth finished basement, or the adhesive does not work. Most manufacturers provide a guide to make installation easier for the owners.

One of the advantages of rubber flooring is its ease of care. Follow manufacturer’s instructions when using cleaning agents. See - rubber flooring is really easy! Rubber flooring can be an excellent choice for any owner. May it be the perfect floor for you.

Manseo author of madmatterinc.com provider of Rubber Flooring, Rubber Mats, Interlocking Mats, custom floor mats, floor mat and more. To get visit us Today!

Article Source: Choose A Right Flooring For Your Home

Adding a patio in your home enhances the overall beauty of your residence. But it can be a costly endeavor and you need ask for help from your friends or someone that knows how to do it so that your project will succeed and make your time worthwhile. It will also quicken and make the whole process enjoyable if you ask for help.

MATERIALS NEEDED IN CONSTRUCTING A PATIO

The materials that you need for this project are concrete, cement, pavers, pressure-treated wood, stones and gravel.

TOOLS

The tools needed for the project are ruler, tape, a wheelbarrow, shovel, saw, sledge hammer, nails and drill.

STEPS IN BUILDING A PATIO

Examining your residence and the surrounding area will help you determine what kind of patio that you want. Decide the overall size of your place and the building materials that you want to utilize. It is advisable to pick materials that are the same to that of your abode so that it matches your project. Be sure that you will pick materials that will match your requirements and budget.

Remember that your materials should be suitable for different kinds of weather all throughout the year. Like avoiding choosing concrete as your material if you live in an area with hot weather because it absorbs heat. Utilizing a frame before constructing your patio is an excellent idea because it allows you to imagine the finish product and simplifies the whole building process.

Construct a frame made out of wood in your construction area to determine the size of space and give it some breadth and dimension. Utilizing the material that you have chosen, line the space for the patio according to the design that you want and do some additional touches.

You can start on your project with materials like pavers, stones and others. Dig the area at least ten inches deep and fix it with stones. You have to be one hundred percent sure that your area veers away from your residence. The slope should be .25 inches for every twelve inches to the land area. This will help prevent H2O stagnation.

Carefully place gravel to a one inch depth. Fix any bumps so that it levels correctly. Place sand above the area and fix any uneven area. Place pavers depending in the pattern that you want. Stabilize the whole set-up by placing sand and water over it.

After you have fixed the area around your area, you should shift your attention on what kind of furniture and additional décor that you want to install in your patio. But make sure that it can adapt to any weather conditions so that it can last for a long time.

ADDITIONAL TIPS

You should make sure that the overall design of your area matches the design of your home. The wood that you used for the support should be water resistant and of top quality to ensure its longevity.

Please click these links if you want to know more about hhow to build a patio or how to build a patio in general.

Article Source: How to Build a Patio

Farmers have utilized pole barns for hundred of years to keep their grain produce and protect their farm animals. Since it will bear the fury of different environmental changes like bad weather, you have to make sure that it is well constructed. One reason why farmers used it is that it is cost efficient. Aside from barn made out of wood, there is also a pole barn made out of metal.

MATERIALS NEEDED FOR BUILDING YOUR BARN

The materials that you needed are lumber and metal sheets.

TOOLS

The tools that you needed are shovel, poles and a sledge hammer.

STEPS IN CONSTRUCTING A POLE BARN

Install the poles two-ten inches from each other. Remember that the type of material that you will utilize will affect the pole barn’s overall length. If you choose poles made out of metal, you need to install them closer for additional stability.

If you choose wooden poles, you do not need to install them closer together. The recommended space between the poles is ten inches. Use the shovel to make holes in the base of the barn for the poles. Make sure that each hole for the poles is eighteen inches deep.

If the soil contains a lot of moisture, you should dig deeper pole holes. After you have installed each pole into their respective place, pour concrete over it to secure it. Pile up the materials at top of each other and make sure that you secure them per level. This will also ensure the stability of the structure and the whole building will not be affected easily especially during environmental disasters like earthquake.

Do not forget to place the entrance in this set-up as well. If you utilize iron sheets when building the support, do not forget to truss each level to ensure that you will have a compact structure. You should also make sure that the roof is not place very high since it will wear out very quickly.

ADDITIONAL TIPS

Barns should be built on solid land to ensure overall structure stability. Remember not make a basement when creating this kind of project since there is a big chance that the soil will lose its stability. You can also reuse materials like old iron poles to reduce expenses. To increase protection to the building, you can install an insulator. Remember to handle the tools and lumber with care and use gloves and safety goggles while working for additional protection.

Please click these links if you want to know more about how to build a pole barn or how to build a pole barn in general.

Article Source: How to Build a Pole Barn

Constructing a screen door is a good solution to keep your abode properly ventilated while also preventing bothersome mosquitoes from entering your residence. The screen should be constructed according to the overall size of the entrance of your home so that it looks good. You can also install a curtain to add more privacy.

MATERIALS NEEDED IN BUILDING A SCREEN DOOR

Some of the materials that you need for your screen door are paintbrushes, brushes for glue, polyurethane glue, one inch nails, one by one cleats, screening mesh, hardware frame for the door and varnish.

TOOLS

The tools that you needed to make your project are staple gun, tape measure, size 10C clamps, staples, knife, saw, ¾ inches chisel, a ¼ inches x ¾ inches screen molding, a 5/4 of 1 ¼ lumber frame, spade, nails and hammer.

STEPS IN BUILDING YOUR SCREEN DOOR

Carefully place the needed parts so that they are accessible when you begin placing the whole thing together. You can either acquire pre-cut lumber for the parts of your screen or you can measure the parts that you needed yourself. You have to make sure that you place the necessary labels on the parts to avoid any complications later.

Place the wooden boards into the machine that holds the saw and manipulate it in the appropriate direction. You can attach horizontally a board on to a pair of other board with screws at a ninety degrees angle. A pair of the lower wooden boards could be place on the workbench which could help secure the jig square properly.

Place the cutting depth of the machine to half the board’s thickness and start cutting it one at a time-slowly moving machine back and forth until you have finish the whole board. The chisel will help you smooth out the joints of the wooden board.

To assemble the screen door, place the different parts together to make sure that every fits perfectly. Once you are sure that the parts fit correctly, use polyurethane glue to connect it. Use a disposable brush to place glue in the joints of your project.

Use the C-clamps to secure the door’s joints. You can only tighten the C-clamps after you are sure that the shape of each individual joint is a flawless square. You can check if the entrance is a perfect square if the diagonals are equal. Wait until the glue dries before doing the next step.

You should varnish the frame before placing the screen. Attach the screen mesh thoroughly on the door frame and make sure that there are no uneven areas. Secure the screen with staples and place the stiles around it. Shave the screen edges with a knife to give it a more refine look. Place the molding around the edges of the screen to cover the staples.

Once the whole door is prepared, you can attach the frame. There are numerous choices so feel free to choose whatever matches your taste. You can also place hinges made out of spring and handle on both sides of your door to make things easier.

Please click these links if you want to know more about how to build a screen door or how to build a screen door in general.

Article Source: How to Build a Screen Door

A lot of individuals do not have the advantage of having good plumbing in their homes. Building an outhouse will help keep bacteria and infection from spreading. It will also make a remote cabin or second residence more fun to live in.

MATERIALS NEEDED FOR CONSTRUCTING AN OUTHOUSE

The materials needed are two by four stock, one by four stock, four by four corner post, screws, nails, roofing paper, shingles, flange and PVC piping.

TOOLS

The tools needed for this project are saw, level, hammer, tape measure, pen and paper.

STEPS IN CREATING AN OUTHOUSE

You will need 3 ribs for the whole set-up: one rib for the foundation, one for the seating area and one for the roof of the outhouse. Create three by three frames and connect them together. You will also require two by four stock to make a pair of lateral feet for the set-up to rest on. You need two pairs of posts to finalize the frame of your project.

The design of the set-up needs four by four wooden posts but you should remember that you need to be able to move it when the pit is full, so make the wooden posts as simple as possible. Support the wooden frames to the supports with bolts. Place the rib for the seating area fourteen inches from the floor. Before making the seat, remember that most individuals want to seat in a normal position or with their knees higher than their hips.

Make a rectangular hole for the seat and it should be eight to ten inches wide and eighteen to twenty inches long. These measurements ensure a healthier environment. Install the seating boards and connect them with the framing rib. After that, place the seat.
There are different wall options that you can pick from. You can either choose a canvas wall to connect to the roof area. If you want a solid wall, remember to pick a light one.

Connect it to the exterior of the ribs and posts. With the overall size of the set-up, no roof joists in the interior are likely to be required. Measure the ends of the roof beams and then place the boards above to create a sloping pitch. Create a hole for the PVC piping that will serve as the ventilation for your creation. Place it a little to the side. Cover the roof with shingles and roofing paper.

A canvas door is usually use for entrance but if you want a wooden one, make a Z-Frame and install a stock to it. Place vertical wooden boards between the upper wooden frame and the lower wooden frame. The waste hole should be two to three inches deeps and two inches square.

Remember that the hole should be created in a level ground and then place the set-up over it. Check for any gaps around it and close any spaces with dirt. Your outhouse is now ready for your convenience and enjoyment.

Please click these links if you want to know more about how to build an outhouse or how to build an outhouse in general.

Article Source: How to Build an Outhouse

It makes a lot of sense to study how to construct brick steps since it is useful for your everyday routine. Unlike other home improvement projects, you do not have to possess a lot of knowledge and skills about carpentry to finish the project.

MATERIALS AND TOOLS NEEDED TO BUILD BRICK STEPS

The materials and tools needed are trowel, bricks, mortar, cement mixture, shovel, two by four wooden boards, measuring tape, saw, hammer, nails, bolts and screws.

STEPS IN CREATING BRICK STEPS

You should first pick the location of your project. Fix it by cleaning all rocks and grass. Since you will be placing cement mixture in the area, it needs to be flat as possible. Make square frames from the wooden boards. Use a saw to create each part. Remember to create it the same size as the foot steps that you want to create.

This will serve as the framework for your set-up so make sure that all of the measurements are correct. Place it on the correct location. Mix the cement mix if necessary. Carefully place it on the square. Use a trowel to even the surface. Check to see if there are any bumps. Allow the set-up to harden for twenty-four hours. Use the tape measure to check the total distance from the top of the porch to the base that you created.

Aside from that, check the height of the brick. This will help you of how many foot steps that you need to create. Place a one inch mortar mixture over the cement mixture. Flatten over some bumps that you will see in the set-up. Place the bricks on top of each other on the mortar mixture. Place a half an inch space for each bricks.

Once all of the bricks have been place in the first layer, use the trowel to scoop some mortar mixture. Use the mortar the fill in the spaces that you have made. Apply it evenly on the bricks. Place a 2nd layer. Keep doing this process until you finish. Finally, scoop up the excess mixture around the brick edges.

ADDITIONAL TIPS

Make sure that you get the correct measurements. Use the tape measurement because even a slight measurement mistake could make the whole thing collapse. Use gloves to protect your hands while carrying the bricks.

If the weather is too hot, work in your project in the afternoons to avoid heat stroke. Aside from that, remember to take breaks as many as possible so that you will not be too exhausted and it will make things easier and enjoyable.

Please click these links if you want to know more about how to build brick steps or how to build brick steps in general.

Article Source: How to Build Brick Steps

Building a porch is not as complicated as lot of individuals might believe. The most challenging of the tasks that you needed to do in the project is to acquire all the materials that you will need. The comfort that you will gain from the whole set-up will be worth the trouble.

MATERIALS THAT YOU NEEDED IN BUILDING A PORCH

The materials that you needed for the set-up are pressure-treated four by four wood post stock, board for the deck, cement, H20, sand, footing clamps, nails, base tubes and screws.

TOOLS

The tools that you needed for this project are saw, drill, measuring tape, chalk line, wheelbarrow, hammer, gloves, wooden stakes, pen and paper and shovel.

STEPS IN CONSTRUCING A PORCH

Examine your yard where you want to construct your porch. Begin by installing the wooden stakes at the four corners and at the area for the stairs. If you are connecting it to an existing structure, you may need to acquire construction permits from your local municipality. But if it is a structure that has a standard or sliding entrance, you need to use a ledger board to serve as a reference in your area.

Begin by looking for a main point at least three inches under the entrance-add an inch to the upper part of the ledger board. This is usually a two by ten board that needs to be installed into the sill of the set-up. Use a footing to keep it firmly connected to the ground. Dig four inches holes for the footings.

Create a mixture using one part sand and three parts cement and then add H2O so that the end product is firm. Place the cement mixture into the base tube that has been place in hole to reach three inches under the surface.

Install the anchors into the footing. Once you have installed the foundations and the ledger board, begin installing the joists and the decking boards. If the whole project is big, you can do it by portion. Carefully place the boards and install the joists at sixteen inches from the middle.

If you can build the deck in portions, install the joists into position and secure them with nails into ground. You do not have to wait to install all of the joists before placing the railings. But before installing it, you need to ask your local building inspector as building codes differ from place to place.

You can also use pre-constructed railings that you can buy from home improvement stores. Secure the railings to the deck by using nails and place the support posts. You can now just sit back and relax and enjoy your masterpiece.

Please click these links if you want to know more about how to build a porch or how to build a porch in general.

Article Source: How to Build a Porch

You can use your pergola to relax and rest especially during summer days. It is very easy to construct and worth your time and effort. You can also ask a professional for help if you want your project to be perfect.

MATERIALS NEEDED TO CONSTRUCT A PERGOLA

The materials that you needed to procure for this endeavor are two by four stock, two by eight stock, four by four post stock, cement mixture, base tubes, post anchors, bolts, screws, nails and paint.

TOOLS

The tools that you needed are nail gun, drill with bits, hammer, shovel, wheelbarrow, tape measure, ladder, ratchet, saw, paint brush and stakes.

STEPS IN BUILDING A PERGOLA

This project can take different forms. For a rectangular shape pergola, construct the basic shape with the help of stakes. Look for a straight line in the set-up to use as an example so that everything is in right order. A solid base is needed if you are making it in a big area and if it will support a big amount of weight. Make two to four inches holes for the posts.

Create a concrete mixture by following the directions printed on the cement bag and place it inside the base tubes. The height of tube should three inches below. Place the post anchors into the cement mixture before it hardens. Install the posts to the anchors and stabilize them with the help of strapping. Place the headers evenly.

Mark the line around the wooden posts where you will cut it to length. Measure the headers to your designs and carefully divide them too. It is better to varnish or paint your set-up before putting the parts together. This will ensure that each part is thoroughly covered with paint.

You should divide the cross members to your desired length. When picking a stock, check if there are no deformities in it. Use a three-four-five triangle level to check if all stocks are of the same level. Paint the members. You can also place a patio in your project.

After that, connect the wooden posts to their supports. Tighten the bolt areas of the headers and the posts. Shape the corner blocks to the size needed where the posts and headers intersect and install the supports with the screws.

Place the cross members on the upper portion of the headers. Attach each header to the bigger boards. If you utilized a middle board for stability, connect it to the bigger boards as well.

Please click these links if you want to know more about how to build a pergola or how to build a pergola in general.

Article Source: How to Build a Pergola

My Stores

Furniture and Decor

Featured Products


Fatal error: Call to undefined function curl_init() in /home/jobgemc/public_html/wp-content/plugins/auto_clickbank_plugin/auto_clickbank_plugin.php on line 154